09_Important; 10_ Information On Product Disposal - eLine QUICK-MOTION Mode D'emploi

EN
mation of the technopolymer rollers. Do not use or keep the
rollers in places where they are exposed to direct sunlight.
2) Always clean the rollers after use. Only use a damp
cloth. Do not use solvents or harsh detergents.
3) If the Quick-Motion is not going to be used for a prolon-
ged period, release the drive belt, bringing it out of its seat,
or close it, otherwise the belt's tension could cause early
loss of transmission efficiency.
4) The coupled bearings on the roller do not require lubri-
cation and are practically maintenance-free.
5) Periodically check the roller clamping screws, make sure
that they are still tight but not so tight as to damage the
plastic frame.
6) In case of wear or breakage of the drive belt, replace it
by proceeding as follows:
• make sure the belts are not tensioned;
• unscrew the screws from the rear left shell, opposite the
cursor (Ref. E) (Pic. 20):
• unscrew the wheel block (Ref. I) (Pic. 21);
• remove the internal shell (Pic. 22);
• remove the front block and the rotating spindle (Pic. 23);
• it is now possible to replace the worn-out belt;
• assemble the front body and make sure to place the
spindle correctly (Pic. 24);
• assemble the internal shell (Pic. 25);
• assemble the oscillating block (Pic. 26);
• assemble the external shell (Pic. 20).
!CAUTION!
• Make sure belts are correctly positioned before begin-
ning training (Pic. 3 - Pic. 4 - Pic. 5).
7) Transmission belts and other spare parts for Quick-
Motion can be ordered from Elite indicating the appropriate
code.

09_IMPORTANT

1) Read and follow the enclosed instructions.
2) Keep people, children and animals away from the roller
during use, since the moving and rotating parts of the roller
and the bicycle can cause damage in case of contact.
3) Before starting training, position the trainer in a dry
place, away from potentially hazardous objects (furniture,
tables, chairs, etc.) in order to avoid any risk of inadvertent
or accidental contact with them.
4) When beginning or ending of your training session, make
sure that your feet, the pedals or the wheels doesn't come
in contact with the transmission belts.
Please use the original hometrainer box if you need to ship
it for assistance and / or repairs.
Any damage caused by the use of other packing methods
is not covered under the warranty.
NOTE: Please check with ELITE, its distributor or retailer
before shipping the hometrainer or one of its components.
16
Shipments without approval will be rejected.

10_ INFORMATION ON PRODUCT DISPOSAL

1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives
2002/95/CE, 2002/96/CE and 2003/108/CE.
The crossed bin symbol given on the equipment or
on the packaging indicates that at the end of its
service life the product must be collected separa-
tely from other waste.
Therefore at the end of its useful life the user must take
the equipment to an appropriate centre for the differen-
tiated collection of electronic and electrotechnical waste,
or return it to the dealer when purchasing a new product
of equivalent type.
Adequate differentiated collection for subsequent sending
of the scrapped equipment to recycling, treatment and
environmentally-friendly disposal can help prevent possible
negative consequences for the environment and the health
of people and favours the resume and/or recycling of the
materials from which the equipment is made.
Improper disposal of the product by the user could involve
penalties as specified by the regulations in force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your
local authorities and ask them what disposal method ap-
plies.
Technical assistance:
Tel +39 049 5940044
e-mail: info@elite-it.com