Care And Maintenance; Troubleshooting - Kärcher SGV 6/5 Mode D'emploi

Care and maintenance

DANGER
Switch off the appliance, pull the power
plug and allow the appliance to cool down
prior to performing any work on the appli-
ance.
Checking seals
 Regularly check the condition of the
seals (2x O-ring) in the accessory plug,
in the handle and in the steam suction
pipes. Replace seals if necessary.
Replacing the coarse dirt filter
 Open the cover of the wastewater con-
tainer.
 Push the locking mechanism of the
wastewater container up.
 Remove the wastewater container.
 Unlock the closure of the wastewater
container and remove the lid.
 Turn cover by 180° and set it aside.
 Remove the coarse dirt filter from the fil-
ter holder and replace it.
Maintenance intervals
Yearly
 Have the device decalcified by custom-
er service.

Troubleshooting

DANGER
Switch off the appliance, pull the power
plug and allow the appliance to cool down
prior to performing any work on the appli-
ance.
DANGER
Repair works may only be performed by the
authorized customer service.
Display without indicator lamp
detergent
 Refill detergent.
 Insert the detergent container correctly,
slide it all the way in to the stop.
refill
Indicator lamp "Service" is flashing
 Turn off the appliance, wait briefly, turn
on the appliance once again.
 If the indicator lamp does not go out, re-
peat the procedure (max. 4 times).
Advance warning descaling (100h more)
 Have the device decalcified by custom-
er service.
Indicator lamp "Service" is yellow
Descaling
 Have the device decalcified by custom-
er service.
Indicator lamp "Fresh water
container empty" is red
 Refill fresh water.
 Insert the fresh water container correct-
ly, slide it all the way in to the stop.
Indicator lamp "Wastewater
container full" is red
 Empty wastewater.
 Insert the wastewater container proper-
ly and lock it.
– 10
EN
yellow
service
error: E07
service
error: E14
service
error: E15
refill
fresh water
drain
wastewater
19