Floor Nozzle; Transport; Storage - Kärcher SGV 6/5 Mode D'emploi

Detail nozzle and accessories
– The round brush is suitable for stubborn
soiling on especially small surfaces
such as stove tops, roller shutters, tile
joints, sanitary facilities, etc.
Note: The round brush is not suitable
for cleaning sensitive surfaces.
– Extension: With this accessory an opti-
mum cleaning of places that are partic-
ularly hard to reach is possible. Ideal for
cleaning heaters, door posts, windows,
roller shutters, sanitary facilities.

Floor nozzle

Application examples
– Cleaning of large surfaces, floors made
of ceramics, marble, parquet, carpets,
etc.
– Floor nozzle with rubber lip insert: For
vacuuming up liquids from smooth sur-
faces.
– Floor nozzle with brush strip insert: For
etching and scrubbing down stubborn
soiling.
Hand nozzle
Application examples
– Recommended for cleaning large glass
and mirror surfaces, smooth surfaces in
general or for the cleaning of fabric sur-
faces such as sofas, mattresses, etc.
Hand nozzle and accessories
– Rubber lip: For smaller surfaces such
as multi-pane windows and mirrors. For
window panes and larger surfaces such
as wall tiles, worktops, stainless steel
surfaces.
– Brush collar: For carpets, staircases,
car interiors, fabric surfaces in general
(after carrying out a test on a hidden ar-
ea). For abrasive cleaning and scrub-
bing.
18
Window cleaning
Note: Preheat window panes during sea-
sons with especially low temperatures. In
order to do so, lightly steam the entire glass
surface from a distance of approx. 19.7 in
(50 cm). This will prevent tensions on the
surface which might lead to glass breakage.
 Evenly steam the glass surface from a
distance of approx. 7.9 in (20 cm) in or-
der to remove the dirt.
 Switch off the steam supply.
 Strip the glass surface web by web from
top to bottom by means of the rubber lip
and vacuum off.
 Wipe the rubber lip and the lower win-
dow frame dry as necessary.
Triangular nozzle
The triangular nozzle must only be used
with the suction function.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Place the floor nozzle in the tray on the
rear side of the appliance and snap the
steam suction pipe in place. Disconnect
steam suction pipes.
 Release the park brakes and push the
appliance by the push handle.
 Grab the appliance on the recessed grip
and on the push handle for loading it.
 Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Empty all containers first.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
– 9
EN

Transport

Storage