Important - Euroflex EZ1 MONSTER Notice D'utilisation

Step 3:
Once the boiler has been filled and the green ready steam light glows,
the Monster is ready to clean.
Steam temperature at the nozzle end is between 104°C / 219°F and 115°C / 239°F.
Temperature lowers to 38°C / 100° F at a distance of 25cm / 10 in from the nozzles.
Step 4: Set the adjustable steam slide (A) to any one of four settings
from minimum to high.
To let the steam come out from the nozzles on the frontal part
of the appliance, act on the trigger on the handle.
In this way it is possible to clean hard to reach corners.

IMPORTANT

We have designed this product as a tool worthy of commercial use.
We recommend that most household jobs be first done with the adjustable steam feature placed
at the (lowest) MINIMUM level. You need not go higher unless the job seems to call for the need
to do so. You'll find the minimum steam levels to be a very effective cleaning setting and your
pad will not be soaked by excess steam.
Step 5: To emit steam from the underside of the steamer just pull the handle downwards.
Step 6: You'll find your floor steamer to easily clean and refresh most hard surfaces and floors
using this setting alone.
NOTE: SOME WATER MAY BE EMITTED. THIS IS NORMAL
23
A