Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Key (Order)
Short press
key
Press and Hold
key for 5
seconds.
Release
key, Press and
Hold
key for 5 seconds.
Note: The grey color words explain the signal's meaning which flash on the window.
IV
FOURTH PART: OPERATE APPLICATION
APPLICATION SETTING
COUNTING
PURPOSE:
Use this function can calculate the wuantity with tota lweight divide by signal weight.
INSTANCE:
(With know the sample's quantity but unknown the unit weight)
Basic Weighing (The machine warm up)
Key (Order)
Short Press
key
Short Press
Key
Short Press
Key
Step Explanation
1. Machine Tare
2. Display Span CAL signal Flash 200g signal
3. Display Linearity CAL signal Flash 100g
signal
4. Put required weight mass on pan Display
100g after 5 seconds.
5. Take weight mass away (Lenearity calibration
finished)
Step Explanation
1. Enter into counting function and display flash
the number of quantity.
Short press
key to cycle the sample quantity setting:
10, 20, 50, 100, 150, 200, 250, 500, 1000pcs.
2. Put any unknown numbers of pieces on pan.
(Example: set 20pcs)
3. The machine start to calculate and display
quantity: 20pcs
4. Take sample away from pan
5. Put any unknown numbers of pieces on pan and
will display a count. (Example: 100pcs)
6. Exit the counting function
USER'S MANUAL ACM
LCD Screen Display
0.00g
200.00g
100.00g
100.00g
0.00g
LCD Screen Display
20 pcs
20 pcs
0 pcs
100 pcs
0.00 g
EN
9
Publicité
Table des Matières
