Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the fan
control.
Your Wall Control has full control of your Fan and Light
(Figure 37) .
9.1
Flip the Wall Control ON/OFF Switch (
"OFF" ( O ) position . Power will be turned OFF to the
Fan and Light .
Flip the Wall Control ON/OFF Switch to "ON" (
position . Power will be restored to the Fan and Light .
NOTE: When the switch is turned back ON, the light
and fan will resume operation as they were prior to
the switch being turned OFF.
To turn Ceiling Fan OFF: Press and release the FAN
POWER OFF (
) Button .
To turn the Fan ON and to Increase the Fan Speed:
Press the (
) Button once for each of the 6 Speeds .
To turn the Fan ON and to Decrease the Fan Speed:
Press the (
) Button once for each of the 6 Speeds .
The LED Display will light up to indicate the New Speed
selected .
NOTE: If the fan is OFF, the first time the (
or (
) button is pressed, it will turn the fan ON at
the speed previously selected.
To turn the Downlight ON/OFF: Press and release the
(
) Button . The Light will turn ON at the Light Intensity
previously selected . To change the Intensity, hold the
Button down . The Intensity will go up and down while
the Button is held . Release the Button at the desired
Intensity .
To turn the Uplight ON/OFF: Press and release the
(
) Button . The Light will turn on at the Light Intensity
previously selected . The Intensity will go up and down
while the Button is held . Release the Button at the
desired Intensity .
If Airflow is desired in the Opposite Direction: Press
the (
) Button on the Wall Control . The Fan must
be operating at any Speed for the Reverse Button to
function . The Blades will turn in the Opposite Direction
and Reverse the Airflow .
9. Using Your Ceiling Fan
) to the
)
)
POWER
INDICATOR
LIGHT
AIRFLOW
DIRECTION
BUTTON
FAN
POWER
OFF
BUTTON
Figure 37
NOTE:
During Summer Months: run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward.
During the Winter Months: run the Fan Clockwise,
as you look up at it, to direct airflow upward.
NOTE: For 3-way Installation: BOTH wall controls
ON/OFF switch must be in the "ON" position for
either control to function. With both wall controls
"ON", the fan and light can be operated as
described from either wall control.
NOTE: If your fan and light go ON and OFF without
using your control, you may be getting interference
from other remote units such as garage door
openers, car alarms or security systems. To remedy
this situations, simply change the transmitter code
per 7.3 Section.
24
....
LIGHT
INTENSITY
BUTTONS
FAN
SPEED
BUTTONS
OFF
ON
ON/OFF
SWITCH
O = OFF
— = ON
U .L . Model No .: CF4802 and CF4502
Publicité
Chapitres
Table des Matières
