Using Your Ceiling Fan - Luminance Brands Kathy Ireland Home SUMMER NIGHT CF652BQ01 Manuel Du Propriétaire

7.1
Restore Electrical Power to the Outlet Box by turning the
Electricity on at the Main Fuse Box or Circuit Breaker Panel.
Check the operation of the Fan by gently pulling on the Pull
Chain Switch.
During Summer Months: Run the Fan Counter-Clockwise, as
you look up at it, to direct airflow downward.
During the Winter Months: Run the Fan Clockwise, as you look
up at it, to direct airflow upward.
If airflow is desired in the opposite direction, turn the Ceiling
Fan off and wait for the Blades to stop turning.
Slide the Reverse Switch (located on the side of the Switch
Housing Assembly) to the opposite position, and turn the
Ceiling Fan on again (Figure 22).
The Fan Blades will turn in the opposite direction and reverse
the airflow.
7.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional). Connect the Wood Pendant (supplied)
to the 3-Speed Switch Pull Chain by sliding the
Wooden Pendant (small hole first) onto the Pull Chain
(Figure 23). Attach the Chain Coupler to the end of the Chain
and allow the Wooden Pendant to fall down over the Coupler.
Your Fan model is equipped with a 4-position,
3-Speed Pull Chain Switch (Figure 23). The operating
sequence is as follows:
Three-Speed
1st Pull — HIGH
2nd Pull — Medium
3rd Pull — Low
4th Pull — OFF

7. Using Your Ceiling Fan

REVERSE
SWITCH
Figure 22
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
Figure 23
16
SWITCH
HOUSING
ASSEMBLY
U.L. Model No.: CF652