How To Wire Your Ceiling Fan - Luminance Brands Kathy Ireland Home SUMMER NIGHT CF652BQ01 Manuel Du Propriétaire

5. How to Wire Your Ceiling Fan

If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box or circuit breaker
panel before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box or circuit breaker panel before
wiring. All wiring must be in accordance with National
and Local codes and the ceiling fan must be properly
grounded as a precaution against possible electrical
shock.
5.1
Connect the Hanger Ball Green Ground Wire and the
Hanger Bracket Green Ground Wire to the Supply Ground
Conductor (this may be a bare wire or wire with green colored
insulation). Securely connect Wires with Wire Connectors
(supplied) (Figure 16).
5.2
Securely connect the Fan Motor White Wire to the Supply
White (neutral) Wire using Wire Connector (supplied)
(Figure 17).
NOTE: CEILING COVER
OMITTED FOR CLARITY.
GROUND
CONDUCTOR
SUPPLY WIRE
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 16
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.
Figure 17
Please contact 1-800-777-4440 for further assistance
13
WARNING
SUPPLY WHITE
(NEUTRAL) WIRE
LISTED WIRE
CONNECTOR
FAN MOTOR
WHITE WIRE
NOTE: CEILING COVER
OMITTED FOR CLARITY.
luminancebrands.com
U.L. Model No.: CF652