Luminance Brands kathy ireland HOME PREMIUM SELECT ECO CF4802AP00 Mode D'emploi page 8

3. Ceiling Fan Assembly
3.7
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the 4 .5" Downrod (Figure 7) .
Seat the 4 .5" Downrod in the Motor Coupler (Figure 7) .
Rotate and align the Downrod Holes with the Two Motor
Coupler Holes .
3.8
Slide the Clevis Pin through the Motor Coupler Holes .
Install the Hairpin Clip through the Clevis Pin Holes to
secure (Figure 8) .
NOTE: The Clevis Pin must go through the holes in
the Motor Coupler. It is critical that the Clevis Pin is
properly installed and secure.
WARNING
!
It is critical that the clevis pin is properly installed and
secured with the hairpin clip. Failure to verify that the
clevis pin is properly installed could result in the fan
falling.
(Continued)
Figure 7
HAIRPIN
CLIP
CLEVIS
PIN
CLEVIS PIN
MOTOR COUPLER
Figure 8
8
DOWNROD
MOTOR
COUPLER
LOOSEN SET
SCREWS (2)
HAIRPIN
CLIP
U.L. Model No.: CF4802 and CF4502