Checking The Water Tanks; Loading The Styler; Hangers - LG STYLER S3RERB Manuel Du Propriétaire

Masquer les pouces Voir aussi pour STYLER S3RERB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

30
OPERATION

CHECKING THE WATER TANKS

Check the water in the water tanks before use. The
water supply tank must be filled with water before
using the Styler. The Styler does not work without
water. The water drain tank should be emptied
before each use.
1
Pull the
tank
the
the
2
Make sure
tank
water.
The full water supply tank can be used
approximately four times, depending on the
cycles used. Use clean tap water or bottled water
for best performance and longer product life. Do
not use distilled water or reuse the water from
the drain tank.
The first time the Styler is used, 2/3 of the water
in the fully filled water supply tank is used. Less
water is used in following cycles.
CAUTION
• Only use water when filling the water
supply tank. Any other substance, such as
detergent or fabric softener, may damage
the Styler.
• Use only clean tap water or bottled
water. Foreign materials in the water may
shorten the lifespan of the Styler.
• Do not use distilled water. The water
sensor may not work.
• Do not reuse the water in the drain tank
to fill the water supply tank.
3
The drain tank will be filled after about three
uses. The tank fills more quickly during drying
cycles. The Styler does not work if the drain tank
is full.
handle
of
forward to
tank
and
level
of
the
water
is
filled
Make sure
water drain
is
empty.
• S
will not affect product performance.

LOADING THE STYLER

each
are empty. Items such as clips, pens, coins, and
remove
keys can damage both the Styler and your clothes.
check
Flammable objects such as lighters or matches
water.
could ignite, causing a fire. Failure to do so
to oil, gasoline, or other flammable substances.
Washing clothes will not completely remove oil
supply
residues. Failure to obey
with
hanger and place them on the shelf before
starting the cycle. Empty hangers may cause
unnecessary noise, friction, and damage to fabrics.
See Storing Hangers, page 28.  Hang hangers in
the same direction on the moving hanger to
prevent collisions.
accessory

hangers

Pants Crease
Care
shelf
Hangers
the
The hangers that come with the Styler are for use
tank
with the Styler only. Any plastic or metal hanger that
has a hook less than 5/32 in. (4 mm) thick and hooks
snugly into the indentations in the moving hanger
can be used in the Styler.
ome
discoloration
the
water
may occur over time. This is normal and
CAUTION
Check all pockets to make sure that they
can
result
explosion, or
Never dry clothes that have been exposed
can
result
explosion, or death.
Remove empty hangers from the moving
items to use it with
shirts, dresses, suits, coats, skirts,
pants without creases or too large
for pants press, or any item that
can use a hanger
pants when creases are desired
sweaters, wool, knitwear, lingerie,
shoes, hats, toys, and other
clothing or items that cannot use
hangers
of
drain
tank
in
fire,
death.
this
warning
in
fire,

Publicité

Chapitres

Table des Matières
loading

Table des Matières