Operation; Before Use - LG STYLER S3RERB Manuel Du Propriétaire

OPERATION

BEFORE USE

Clean the Styler.
Clean the Styler thoroughly and wipe off all dust that accumulated during shipping. See
Maintenance, page 37. Do not plug in or operate the appliance until the interior and
exterior have thoroughly dried.
Do not scratch the Styler with a sharp object or use a detergent that contains
Do not peel off the model or serial number label or the technical information on
Unpack accessories.
Unpack the shelf and hangers. For instructions on installing or using accessories, see
Loading the Styler, pages 25-28. Accessories can be purchased separately from the LG
Customer Information Center. Call 1-800-243-0000 (USA) or 1-888-542-2623 (Canada).
Assemble the drip tray.
Insert the drip tray at the bottom of the cabinet. See Assembling the
Drip Tray, page 18.
Connect the power supply.
Check if the power supply is connected before use.
Wash dirty clothes if necessary before putting them in the Styler.
The Styler does not have a washing function. Stains and loose dirt from one item
may transfer to others during a cycle. Wash or brush off dust and dirt, or spot-
clean items, to avoid setting stains or transferring dirt or odors.
CAUTION
alcohol, bleach, a flammable liquid or an abrasive when removing any tape or
adhesive from the Styler,.
the rear surface of the Styler.
NOTE
Remove adhesive residue by wiping it off with your thumb or dish detergent.
OPERATION 23