Orders Of Spare Parts - T.I.P. WPZ 450 R Mode D'emploi

Prior to placing the unit in the water, disconnect the power supply to all units used in the
water.
Keep from temperatures below zero and store in a environment protected from frost.
Before operating the unit check that that the pump is placed in an upright and solid postion. The
appliance has to be placed on a flat basis.
Inspect the pump prior any installation, check that the line cord or the plug are not damaged. Do not
use the unit if the cord or plug are damaged and return it to the shop/seller for assistance.
Plug the unit into a 230V socket.The pump will start to work. To switch it off simply unplug it form the
mains.
Always disconnect the unit from mains before any maintenance. Do not make any technical
modification to the unit, nor adjust the flow rate while it is immersed in water. Always operate the
appliance in water. Do not run dry as this may cause overheating and damage the entire unit.

7. Orders of Spare parts

The quickest and cheapest way to order spare parts is on the web. Our web site www.tip-pumpen.de
offers a detailed internet shop for spares and enables customers to place an order with few clicks. In
the web we also supply relevant information and give free and technical advice on all our range, along
with latest news, trends and newest products on the market of garden pond pumps.
8
22