Delivery Contents; Technical Data - Scheppach Plana 3.1c Notice Originale

Planer
Cutterblock cover
Jointing fence
Dimensions L x W x H mm
Table height mm
Jointer table L x W mm
Thicknessing table L x W mm
max. thickness height
Weight kg
Cutterblock
Cutterblock ø mm
Cutting circle ø mm
Revolutions max. 1/min
Number of planing knives
Planing knives
Feed speed m/min
Input power kW (230/400V)
Output power kW (230/400V)
Nominal current A (230/400V)
Subject to technical changes!
■ NOISE LEVELS
Sound conduction level
LWA according to EN ISO 106.2 dB(A)
3744
Uncertainty K 3 dB(A)
Sound pressure level LpA
93.2 dB(A)
according to EN ISO 11201
Uncertainty K 3 dB(A)
Note: The specified sound levels have been
determined using a standardised test proce-
dure and can be used to compare different
electronic devices. Furthermore, these values
can be used to assess in advance the strain
on the user caused by the sound.
Warning! Depending on how you use the po-
wer tool, the actual values can vary from those
stated. Take measures to protect yourself
from noise. Consider the entire work process,
i.e. even times during which the power tool
■ STATEMENT CONCERNING DUST EMISSION
The values for dust emission measured
according to the "Principles for testing dust
emission (concentration parameters) from
wood processing machines" created by

Delivery contents

4 base plates
Hexagonal key SW 5
Operating instructions

Technical data

250
1090x510x950
830
525x256
660x247
180
176
Ø 75x250
Ø 73
Ø 75
4000
3
20x250x3
5,5
2,3 / 2,3
1,7 / 1,9
10,9 / 4,05
works without load or is switched off. Suitable
measures include, amongst others, regular
maintenance and care of the power tool and
the attachments, regular breaks as well as
good planning of the work processes.
The figures quoted are emission levels and
are not necessarily safe working levels. Whilst
there is a correlation between the emission
and exposure levels, this cannot be used
reliably to determine whether or not further
the Technical Committee Wood, lie below
2 mg/m3. That means a permanently safe
compliance with the TRK threshold value for
wood dust, applicable in the Federal Republic
15
310
1605x630x960
850
780x320
750x307
220
292
Ø 95x310
Ø 93
Ø 93
4400
4
20x310x3
6,5
2,5 / 2,5
2,0 / 2,1
9,3 / 4,2
precautions are required. Factors that
influence the actual level of exposure of the
workforce include the characteristics of the
work room, the other sources of noise, etc. i.e.
the number of machines and other adjacent
processes. Also the permissible exposure
level can vary from country to country. This
information, however, will enable the user of
the machine to make a better evaluation of
the hazard and risk.
of Germany can be expected when the power
tool is connected to an appropriate operational
extraction unit with an air speed of at least 20
m/s.
410
1680x810x960
850
820x420
750x408
230
334
Ø 95x410
Ø 93
Ø 93
4400
4
20x410x3
6,5
3,2 / 3,6
2,4 / 2,9
13,8 / 5,25
GB