Functional Description; Intended Use - Black & Decker BDECS200 Mode D'emploi

or allow children to operate the laser.
• Do not disassemble. Modifying the
product in any way can increase the
risk of laser radiation.
WARNING:
Use of controls or
adjustments or performance of procedures
other than those specified in this manual may
result in hazardous laser radiation exposure.
• Do not operate in explosive
atmospheres, such as in the presence
of flammable liquids, gases, or dust.
• Storeidleproductoutofreachof children
and other untrained persons. Lasers /
power tools are dangerous in the hands
of untrained users.
• Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one laser / power tool, may
create a risk of injury when used on
another laser / power tool.
• Repairs and servicing MUST be
performed by a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious injury.
• Do not remove or deface warning
labels. Removing labels increases the
risk of exposure to radiation.
• For indoor use only.
• This product is intended for use in
a temperature range of 41°F(5°C) -
104°F(40°C).
CAUTION:
Use of controls or
adjustments or performance of
procedures other than those specified in
this manual may result in hazardous laser
radiation exposure.
The following laser warnings are located
on your saw.
MOTOR
Be sure your power supply agrees with
nameplate marking. 120 Volts AC means
your tool will operate on standard 60 Hz
household power. Do not operate AC tools
on DC. A rating of 120 volts AC/DC means
that your tool will operate on standard 60 Hz
AC or DC power. This information is printed
on the nameplate. Lower voltage will cause
loss of power and can result in over-heating.
All BLACK+DECKER tools are factory-
tested; if this tool does not operate, check
the power supply. This tool is AC only.

INTENDED USE

This circular saw is designed for wood
cutting applications. Do not use water
feed attachments with this saw. Do not
use abrasive wheels or blades. Do not
use under wet conditions or in presence
of flammable liquids or gases. Do not cut
metal, plastic materials, concrete, masonry,
or fiber cement materials with this saw.
SAVE THESE
INSTRUCTIONS

Functional Description

1. On/off switch
2. Main handle
3. Secondary handle
4. Shoe
5. Saw blade
6. Saw blade lower guard
7. Lower guard retracting lever
8. Laser (BDECS300 ONLY)
9. Bevel adjustment knob
10. Outer blade clamp washer
11. Blade retaining bolt
12. Depth adjustment lever
13. Depth scale
14. Bevel angle scale
15. Saw blade hex wrench
16. Spindle lock button
2
15
7
11
10
6
7
1
5
16
3
8
14
9
4
13
12