Intermec EasyCoder 7422 Manuel D'utilisation page 60

7422 Thermal Printer User's Guide
Label Sensor
Locations
44
Your printer is equipped with a sensor
capable of detecting the gap between labels
while they are being printed. This feature
depends on the ability of the Gap Sensor to
"see through" the label liner between
labels. An optional Black Line Sensor may
also be installed in your printer. This type
of sensor is used with special labels that
have a black line printed on the back of the
label liner between each label.
Due to manufacturing differences in label
stock, the sensor may have difficulty
distinguishing the difference between
labels and the liner. When this occurs, the
printer Power Indicator will switch from
GREEN to ORANGE or RED. If this
condition occurs, the AutoSense feature
should be activated to adjust the sensitivity
of the sensor.