Intermec EasyCoder 7422 Manuel D'utilisation page 101

Paper Quality,
The print speed can be adjusted to
Print Speed
compensate for manufacturing differences
in label stock. Selecting a slower print speed
can improve the appearance of lines and
text on some label stocks. When printing
large labels or labels with a lot of
information near the right edge, a slower
print speed will avoid pauses while printing
caused by buffer under-run.
Print Quality,
The print darkness or density can be changed
Print Density
by using the Print Quality option. If print looks
faded when printing at high speed, select a
higher darkness number for the Print Quality
setting. If horizontal lines seem to run together,
select a lower darkness number.
Print density is also affected by print speed.
Changing both Paper Quality and Print
Quality may be required to achieve the
desired results
To access this menu, select Options from the
printer setup control panel.
85