Retrofitting A Seuthe Steam Generator; Retrofitting A Plux 10880 Decoder (Only For Item 72250) - Roco DRB 23 002 Manuel

▪ Retrofitting a Seuthe steam generator

Functions when operated with bridge plugs (= analogue operation):
– Light change - white/red (dependent upon direction of travel)
– Seuthe 10 smoke generator (if retrofitted)
Functions when operating with a retrofitted 10880 decoder (= digital operation)
F0 = Light change - white/red (dependent upon direction of travel)
F1 = Seuthe 11 smoke generator (if retrofitted)

▪ Retrofitting a Plux 10880 decoder (only for Item 72250)

First remove the chimney hood and then install
the Seuthe steam generator no. 10 (for analogue
DC operation) or no. 11 (for digital DC operati-
on).
When dealing with a steam generator installed in
digital mode complete with a retrofitted 10880
decoder, it is possible to switch the steam genera-
tor on and off via the F1 key.
23
23