Error Codes - LG STYLER S3 F Serie Manuel De L'utilisateur

Masquer les pouces Voir aussi pour STYLER S3 F Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Performance
Problem
Wrinkles at back of neck
after cycle
Creases are gone from
pants after cycle
Clothing has water spots
after cycle, color has faded
or run

Error Codes

Problem
Fill Water icon is
blinking
Empty Water icon is
blinking
dE Error is blinking
AE, LE, LE2, E1, E4,
TE1, TE2, TE3, TE5
shows on the display.
Wi-Fi
Problem
Trouble connecting appli-
ance and smartphone to
Wi-Fi network
Possible Cause
Item too large for hanger or fabric
too delicate
Pants were hung on the moving
hanger, not in the pants press
Fabric is not washable, or is not
colorfast
Possible Cause
Water supply tank is empty or
tank is missing
Water drain tank is full or tank
is missing
Door is not completely closed
System error
Possible Cause
The password for the Wi-Fi
network was entered incorrectly.
Mobile data for your smartphone
is turned on.
The wireless network name (SSID)
is set incorrectly.
The router frequency is not 2.4
GHz.
The distance between the
appliance and the router is too far.
TROUBLESHOOTING
Solutions
Use the right size hanger for the item so the
fabric won't bunch up and cause wrinkles. Some
fabrics are delicate and will bunch around the
hanger no matter what you do. Use the shelf for
lingerie and other delicate items.
Hang pants in the pants press to maintain
creases at edge of pants legs.
Check fabric care labels before treating items.
See Sorting Loads, page 21 and the Cycle
Guide, page 31.
Solutions
Fill the water supply tank and reinstall it.
Empty the water drain tank and reinstall
it.
Check that items are completely inside
the cabinet and that the door is tightly
closed.
Unplug the appliance and call for service.
Solutions
Delete your home Wi-Fi network and begin
the registration process again.
Turn off the Mobile data on your smartphone
before registering the appliance.
The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
Only a 2.4 GHz router frequency is supported.
Set the wireless router to 2.4 GHz and connect
the appliance to the wireless router. To check
the router frequency, check with your Internet
service provider or the router manufacturer.
If the appliance is too far from the router, the
signal may be weak and the connection may
not be configured correctly. Move the router
closer to the appliance or purchase and install
a Wi-Fi repeater.
45

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Styler s3wfbnStyler s3mfbn

Table des Matières