Control Panel; Control Panel Features; Power On/Off; Time Display - LG STYLER S3 F Serie Manuel De L'utilisateur

CONTROL PANEL

The control panel responds to touch using static electricity. A light touch is enough to operate it. Use
a cloth when cleaning the controls to avoid contacting and activating the keys. Foreign substances on
the control, wearing gloves, or touching the keys through cloth may prevent the keys from activating.

Control Panel Features

Depending on the model, some of the following functions may not be available.

 POWER ON/OFF

Touch Power to turn the Styler ON/OFF. Once
the cycle is complete, the Styler automatically
turns off after a few seconds if no keys are
touched.
NOTE: Touching Power during a cycle will cancel
that cycle and the cycle settings will be lost.
 CYCLE COMPLETION INDICATOR
This portion of the display shows which stage of
the styling cycle is currently underway (Preparing,
Steaming, Drying, Sanitizing, or Night Care).
 OPTION AND ALERT INDICATORS
Delay On: lights when the Delay Start
feature is set.
Fill Water: lights when the water supply tank
is missing or empty.
Empty Water: lights when the water drain
tank is missing or full.
Night Care: lights when the Night Care
feature is set.
Remote: lights when the Remote Start
function is set.
Wi-Fi: lights when the Wi-Fi function is set.

 TIME DISPLAY

The display shows the estimated time remaining
and error messages for the Styler.
The cycle time may vary by usage conditions.
 START/PAUSE
Touch and hold to START the selected cycle. If
the Styler is running, touch to PAUSE the cycle
without losing the current settings.
NOTE: If you do not touch Start/Pause to resume
a cycle within an hour of pausing it, the Styler
turns off automatically.
 LG ThinQ
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a smart
phone. See Smart Functions, page 36.
REFRESH / *Remote Start

Touch the icon to select a Refresh cycle. Touch
repeatedly to toggle through the settings. See the
Cycle Guide, page 31.
Press and hold for three seconds to activate the
Remote function. See Smart Functions, page 36.
OPERATION 29