LG STYLER S3 F Serie Manuel De L'utilisateur page 27

Opening and Closing the Pants Hanger
1 To open, fold the hook down toward the
hanger blades to unlock and separate the
blades.
hook
hanger
blades
2 Once pants are inserted, bring the blades
together and rotate the hook up and away
from the blades to lock them in place.
Hanging Pants On the Pants Hanger
1 Remove all objects from pants pockets and
button the back pockets.
2 Fold pants along crease
lines (or where crease
lines would be), and
attach the pants hanger
at the ends of the pants
legs.
3 Tug gently on the sides of the pants legs.
Make sure pants are stretched tight within
the hanger, with no wrinkles, and will not
fall out of the hanger during the cycle.
4 Place the pants hanger on the moving
hanger or in the Pants Crease Care.
Using the Pants Crease Care
1 Open the Pants Crease Care by pressing on
the icon on the side.
2 Hang the pants hanger on the hook above
the Pants Crease Care that best fits the
length of the pants being pressed.
If the pants are longer, use the higher hooks
to keep the pants from hitting the floor of the
cabinet.
The Pants Crease Care is not designed to work
with pants that are wider than 38 in. (96 cm) or
longer than 43 5/16 in. (110 cm). Check the size
of the pants before using the Pants Crease Care.
If pants are too large, use the moving hanger.
3 Make sure the pants are
hanging straight.
Check the creases on the
legs to make sure they are
lined up. Fix the pants with
2 clips before closing the
Pants Crease Care. If the
pants legs are not aligned
properly or the pants are not
hanging straight, double lines may appear at the
pants' edges, or the pants may be wrinkled.
4 Close the Pants Crease
Care, then straighten
the pants once more.
Gently tug the edges of the
pants to smooth out any
wrinkles. Make sure the
pants are hanging straight in
the Pants Crease Care.
OPERATION 27