Electromagnetic Ields (Emf); Using The Appliance - Philips HP4684 Mode D'emploi

EnglisH
8
- Do not wind the mains cord round the appliance.
- Only use the appliance on dry hair.
Do not use the appliance on artiicial hair.
-
- Do not use the appliance for any other purpose than described in
this manual.
- Keep the barrel and the clip clean and free of dust, dirt and styling
products such as mousse, spray and gel. Dust, dirt and styling
products may cause damage to the ceramic coating.
- The barrel and the clip have a ceramic coating. This coating slowly
wears away over time. This does not affect the performance of the
appliance.
- If you use the appliance on colour-treated hair, the barrel may stain.

Electromagnetic ields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic ields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientiic evidence available today.

using the appliance

Curlers are powerful styling tools and must always be used with care.
As with all curlers that reach salon high temperatures, do not use the
appliance frequently to avoid damage to the hair. If you use the curler
incorrectly or if you use it at the wrong temperature setting, you could
overheat your hair or even burn it.
curling
1 Put the plug in the wall socket.
 Set the on/off slide to 'I' to switch on the appliance. (Fig. )
The default temperature setting of 10 appears on the
,
display. (Fig. )
As soon as the appliance has heated up to this setting, the word
,
'READY' appears on the display.