Electromagnetic Fields (Emf); Using The Appliance - Philips SalonStraight Want2Move HP4646 Mode D'emploi

EnglisH
8
- Wait until the appliance has cooled down before you store it.
- Do not wind the mains cord round the appliance.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
general
- This appliance is suitable for mains voltages from 100 to 240 volts.

using the appliance

straightening
Straighteners are powerful styling tools and must always be used with
care.
As with all straighteners that reach salon high temperatures, do not use
the appliance frequently to avoid damage to the hair. If you use the
straightener incorrectly, you could overheat your hair or even burn it.
Always follow the steps below.
1 Put the mains plug in the wall socket.
Note: This appliance has an internal dual voltage mechanism that
automatically adjusts to the required voltage. Therefore it can easily be used
abroad. Use a plug adapter suitable for the wall sockets in the country you
visit to connect the appliance to the mains.
 Push both folding system buttons simultaneously (1) and unfold the
straightener (). (Fig. )
Note: Always make sure the straightener is fully extended when you use it.
 To unlock the straightening plates, turn the easy-lock system
anticlockwise until the plates open (Fig. ).
 Press the on/off slide upwards.