Care And Maintenance - CAPITAL SPORTS Infinity Pro 4.0 Mode D'emploi

Problem
Error code E7
No pule measurement.

CARE AND MAINTENANCE

Folding the treadmill
1. Restore the incline to flat (0)
position.
2. Unplug from power point before
folding.
3. Lift deck until it's parallel to the
upright post and cylinder locks
into position.
Unfolding the treadmill
1. Place one hand on handle bar, use the other to push top of the running
deck forward.
2. Press one foot on the middle section of the cylinder to disengage the
locking mechanism.
3. Allow deck to begin slowly dropping before releasing hands.
Moving the treadmill
The treadmill can be moved around in house safely in its fold-up position by
using the transport wheels. Firmly hold onto handle bars with both hands,
pull the treadmill towards you, then portable on wheels, drag or push slowly.
Mögliche Ursache
Console does not detect
the safety key signal.
Hand pulse wire is not
connect well or wire
defected.
Console circuitry defected.
Lösungsansatz
Check the safety key .
Connect the wire well or
change the wire.
Change the console.
Cylinder
Transportation wheel
EN
71