Wahl 4340 Manuel D'utilisation page 13

4. Select the required temperature setting.
Switch for temperature settings (D):
0
Temperature setting 0, for cold air
I
Temperature setting 1, for hot air
II
Temperature setting 2, for hotter air
Cold shot button(C):
By pressing and holding the cold button, the hairdryer
can be switched to cold air for short periods. To return to
the set temperature, simply release the cold-shot button.
5. Using the on/off switch (E), switch off the hairdryer after use.
Operation
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styling brush.
1. Position the nozzle and press it towards the housing (Fig.2ⓐ).
2. You can remove the nozzle simply by pulling it off in the direc-
tion of the arrow (Fig. 2ⓑ).
TOURMALINE coating
Negative ions have an antistatic effect and are gentle to the hair.
They close the scale layer, creating a smooth, silky hair surface.
They lock in the natural moisture of the hair, thereby creating the
ultimate shine.
Overheat protection
The hairdryer is fitted with an overheat protection facility. Should
the appliance overheat, the heating process is interrupted and only
cold air flows out. After the appliance has cooled down, the heating
element will switch on again automatically.
Maintenance
Warning! Injuries and material damage due to incor-
rect handling.
f Switch off the hairdryer before cleaning it or perform-
ing any maintenance. Disconnect the hairdryer from
the power supply.
f Allow the hairdryer to cool down completely.
Cleaning and care
Danger! Electric shock due to penetration of liquid.
f Never immerse the hairdryer in water!
f Do not allow any liquid to get inside the appliance.
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the hairdryer and
accessories.
f Never use solvents or scouring agents.
f Only wipe the hairdryer with a soft, slightly damp cloth.
f To maintain the performance of your hairdryer, regularly clean
the air inlet with a soft dry brush.
Proceed as follows:
3. Twist the cover in an anti-clockwise direction (Fig. 4ⓐ) and
remove.
4. Clean the cover and air inlet with a soft brush (Fig. 5).
5. Replace the cover and twist it in a clockwise direction until it
clicks into position (Fig. 4ⓑ).
Problem elimination
Hairdryer only runs with cold air
Cause: The overheat protection is active.
f Allow the hairdryer to cool down.
f Clean the air inlet (Fig. 4/5).
Hairdryer is not working.
Cause: Defective power supply.
f Make sure that contact between the mains and the socket is
faultless. Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to repair
the hairdryer yourself!
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appli-
ances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equipment
Directive 2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of with the
local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recyclable
materials. Dispose of this in an environmentally friendly
manner by recycling it.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
13