England's Stove Works 25-EP Mode D'emploi page 66

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

More: 
Fuel loading and re‐loading: Practical Tips for Building a Fire – See your owner's manual 
for information on loading (and re‐loading) your fuel, as well as for fire‐starting 
procedures.  
 
Fuel Selection: Once your appliance is properly installed, be sure to follow your owner's 
manual regarding fuel selection and starting and operating your appliance, including the 
following practical tips that will help you obtain the best efficiency from your stove.  
 
 
Daily Operation Notes 
 Only high quality, ¼" (.25 in.) diameter wood pellets, should be used in this stove.  Using low 
grade wood pellets with high ash content OR  wood pellets with a high moisture content 
can cause the burn pot to fill with ash at a more rapid pace and can cause intervals between 
periodic maintenance to become significantly shorter.  Please read the "Maintenance" 
section of this manual thoroughly to understand how fuel selection affects stove operation, 
maintenance and cleaning. 
 Variation in the flame height is normal; not all wood pellet fuel is uniform in size, which can 
affect the way pellets are fed into the burn pot.  Although the flame height may increase 
and decrease during operation, there is no loss of efficiency. 
 Always store wood pellet fuel in a dry location; storing wood pellet fuel in a dry location 
ensures the fuel will remain pelletized and low in moisture content.  Also, be certain that all 
wood pellet fuel is stored at a safe distance from the pellet heater; storing fuel in close 
proximity to the stove can result in a fire.  
This pellet burning room heater is equipped with a specially designed burn pot which comes 
preinstalled from the factory.  This burn pot elevates the burning pellets and delivers air at the 
precisely‐required locations.  Pellets must only be burned in the factory burn pot; no 
modifications should be made to this burn pot and no additional grates or other fire elevators 
should be used. 
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
66

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

55-shpep55-trpep25-epi55-shpepi55-trpepi

Table des Matières