England's Stove Works 25-EP Mode D'emploi page 6

Minimum Fireplace Dimensions
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING
CLEANING THE UNIT AS SPECIFIED, AND REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR
DUE TO UNSAFE INSTALLATION OR USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH QUESTIONS.
FIREPLACE INSERT DIMENSIONS
 Unit Height (In Fireplace)
o 20.00" [508mm]
 Unit Depth (In Fireplace)
o 9-7/16" [239.7mm]
 Unit Width (In Fireplace)
o 21-3/16" [538.2mm]
 Bottom to Flue Collar
o 7-1/4" [184.2mm]
 Left Side to Flue Collar
o 5-1/2" [139.7mm]
 Unit Width (Outside Fireplace)
o 26.0" [660.4mm]
 Unit Depth (Outside Fireplace)
o 13.0" [330.2mm]
 Surround Height
o 29-1/4" [742.95mm]
 Surround Width
o 40.0" [1016mm]
 Min. Fireplace Width (Front)
o 36.00" [914.4mm]
 Min. Fireplace Width (Rear)
o 22.0" [558.8mm]
 Min. Fireplace Height
o 21.0" [533.4mm]
 Min. Fireplace Depth
o 16.0" [406.4mm]
The minimum fireplace dimensions
listed may not apply to your specific
installation and are for general
reference only. Use the unit
dimensions, along with practical
knowledge of how an insert fits into a
fireplace and connects to the chimney
system, to precisely determine if this
insert will work in your fireplace.
6