Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Step 3
Attach SPACER TUBES in between SFB and SIDE BRACE and secure with two (2) 2" HEX
BOLTS and HEX NUTS. The HEX BOLTS should go through from the SFB side, see below. Align
the SPACER TUBES with the corresponding holes on the leg brace and SFB. Insert the 2" HEX
BOLT through the SFB then through the SPACER TUBE , and finally through the LEG BRACE.
Then secure the HEX BOLT with the HEX NUT.
SFB
Spacer Tube
Hex Nuts
Hex Bolts
Side Brace
Step 4
Attach the WIRE HANDLE to the SFB right side with two (2) 1/2" HEX BOLTS, two (2) LOCK WASHERS, and
two (2) HEX NUTS, see below.
Wire Handle
Hex Nuts
Hex Bolts
SFB
Lock Washers
B-8
Publicité
Table des Matières
