Technical Data; Service / Warranty - Gardena EasyCut 42 Accu Mode D'emploi

11. Technical Data

Designation
Strokes
Length of cutter blade
Tooth gap of cutter blade
Weight including battery
Workplace related
sound pressure level L
pA
Uncertainty K
pA
Noise emission value L
Hand / arm vibration a
vhw
Uncertainty K
ah
Battery
Battery capacity
Battery charging time
Idling time
Battery charger
Mains voltage
Rated output current
Max. output voltage
1)
Measuring method according to EN 60745-2-15
The declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in
which the tool is used
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2) directive 2000/14/EC, 2011/65/EU

12. Service / Warranty

)
1
2 )
WA
)
1
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit that
can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge if
the following conditions apply:
• The unit must have been handled properly and in keeping with the
requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
The blade and eccentric drive are wearing parts and are not covered
by the guarantee.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If a fault occurs with your hedge trimmer, please return the faulty
unit together with the receipt and a description of the fault, with
postage paid to the address of the Service Centre at the back of
these operating instructions.
EasyCut 42 Accu (Art. 8872)
Hedgetrimmer
1050 / min.
42 cm
16 mm
2.78 kg
71.4 dB (A)
3.0 dB (A)
measured 82 dB (A) / guaranteed 85 dB (A)
1.1 m/s
2
1.5 m/s
2
NiMH (18 V)
1.6 Ah
approx. 6 hrs
approx. 60 mins (with full battery)
230 V / 50 Hz
600 mA
21 V (DC)
17