Alcad GRF-304 Mode D'emploi page 17

Masquer les pouces Voir aussi pour GRF-304:
Table des Matières

Publicité

Programme each telephone/connections bracket
from the main entrance panel of the building. (see
the technical datasheet that comes with the
connections bracket/telephone).
The code assigned to the telephone/connections
bracket will depend on the pushbutton that is
assigned; code 1 corresponds to the pushbutton
which is furthest away from the audio unit (i.e.
the right pushbutton on the bottom row).
Adjust the volume level on the entrance panel (1)
and on the monitors/telephones (2).
Place the protective cover of the audio unit in
position.
Fix the panel to the flush-mounted box. See the
datasheet of the pushbutton entrance panel.
2 - W I R E
D O O R
Code depending on the pushbutton
Simples
Assign the pushbuttons of the external panel to
each of the inner buildings. See "Outer entrance
panel: assigning pushbuttons to each building",
page 19
E N T R Y
S Y S T E M S
Doubles
Panels in parallel
External point of entry

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rve-014

Table des Matières