Interacoustics AT235 Mode D'emploi page 37

AT235 Instructions for Use - EN Page 31
Save & Exit saves the current session in Noah or OtoAccess™ (or to
a commonly used XML file when running in standalone mode) and
exits the Suite.
Toggle Ear changes from right to left ear and vice versa.
List of Defined Protocols allows viewing which protocol was used for
historic sessions.
Temporary setup allows viewing the used settings for historic
sessions.
List of historical sessions accesses historical sessions for review or
the Current Session.
Go to current session takes you back to the current session.
Report editor button opens a separate window for adding and saving
notes to the current session.
The hardware indication picture indicates whether the hardware is
connected. Simulation mode is indicated when operating the
software without hardware.
The protocol listing shows all tests that are part of the used protocol.
The test that is displayed in the test screen area is highlighted blue or
red, depending on the chosen ear.
If more tests than can fit in the window are included in the protocol, a
scrollbar will be visible.
A white checkmark indicates that (at least some) data for this test
was saved.