Connecting To A Computer - Canon imageFORMULA DR-M160 Guide De Référence

0-00-DR-M160_RG_US.book Page 14 Friday, June 10, 2011 5:31 PM
STEP 3

Connecting to a Computer

Connect the scanner to the computer and the power supply.
IMPORTANT
• Do not connect the scanner to the computer before installing the software.
• Before connecting the scanner to the computer, verify that the power of the scanner is OFF.
If the power is ON, turn it OFF.
USB cable (included with the scanner)
AC adapter (included with the scanner)
To the power outlet
14