Spray Arms - Thermador DWHD770W Serie Notice D'utilisation

Note: Clean the filter after washing loads with large
amounts of food soils or loads with a heavy starch
content to maintain optimal performance.
To check or clean the filter system:
1. After each wash cycle check the filters for residue.
Unscrew the Large Object Trap as illustrated and
2.
remove the entire filter system.
Remove the microfilter from the fine filter for easier
3.
cleaning.
Rinse the filters under running water and use a soft
4.
brush to clean.
Note: do not use abrasive brushes or steel wool, etc.,
as they may damage the filter.
5. Reinstall the filter system in reverse sequence and
lock into place by screwing the Large Object Trap until
the marking arrows align.

Spray arms

Limescale and contaminants in the rinsing water may
block nozzles and bearings on the spray arms
1Z
and .
1. Check outlet nozzles on the spray arms for blockages.
2. Unscrew the upper spray arm
downwards (2).
3. Remove the lower spray arm
Clean spray arms under running water.
4.
5. Re-engage or screw on spray arms.
1:
1:
(1) and remove
1Z
upwards.
35