Miele STB 201 Mode D'emploi page 12

en - Use
Fitting the Turbobrush
Model STB 205
This Turbobrush is intended for use
with Miele vacuum cleaners.
^ Instead of the usual floor attachment,
fit the Turbobrush to the suction tube.
Ensure that the locking device
engages.
Model STB 201 Vario
This Turbobrush has an adapter,
enabling it it be used with non-Miele
vacuum cleaners. The adapter fits
suction tubes with a diameter of
between 30 and 38 mm. Only use the
Turbobrush with high performance
vacuum cleaners.
Opening the air adjustment
slide
The brush is operated by the suction
power of the vacuum cleaner. With
deeper, dense pile carpets the roller
brush may rotate more slowly. This is
caused by the carpet pile creating a
seal around the the mouth of the
Turbobrush and hindering the flow of
air. This will affect how well the carpet
is brushed.
^ To increase the airflow, open the air
adjustment slide (left hand illustration).
In all other situations the air adjustment
slide should be closed, to benefit from
the full suction power.
^ Close the air adjustment slide (right
hand illustration).
12