Drainage Pipe - Gree U-match Série Manuel De L'utilisateur

DC Inverter U-match Series Cassette Type Unit
5.3.2 Clean Air Intake Grill
1) Open the air intake grill.
2) Take out the air filter.
3) Take out the air intake grill.
(Open the air intake grill at an angle of
45 degrees, and then lift it up).
4) Cleaning
Use soft brush,
detergent to clean. After cleaning,
shake off the water or let it dry.
Notice: do not use hot water (above
45 ℃ ) to clean, otherwise the filter
may be discolored or out of shape.
5) Install the air intake grill.
6) Install the air filter.
7) Close the air intake grill.
5.3.3 Heat Exchanger of Outdoor Unit
Conduct cleaning for the heat exchanger of outdoor unit periodically, clean it
once at least in every two months. Clean the dust and sundries on the surface of
the heat exchanger with dust collector and nylon brush, if there's compre ssed air
source; use the compressed air to blow the dust on the surface of the heat
exchanger. Don't use tap water for cleaning.

5.3.4 Drainage Pipe

Periodically check if the drainage pipe is blocked to smooth the condensate
water.
How to clean the air intake grill
water, neutral
58
Same with step 1 in ―Clean Air Filter‖.
Same with step 2 in ―Clean Air Filter‖.
Refer to step 3.
Same with step 4 in ―Clean Air Filter‖.
Refer to step 1.