General Operation; General Operation Oyster® Soundbar - Ten Haaft Oyster Instructions D'utilisation

7. GENERAL OPERATION

7.1 General Operation Oyster® Soundbar
Standby/ON
When you connect the unit for the first time to the power supply, the unit will automatically switch on.
button on the remote control or press and hold the /
• Press the
STANDBY mode, the POWER indicator will illuminate red.
button on the remote control or press the /
• Press the
mode.
• Disconnect the power supply if you want to switch OFF the unit completely
Selecting the Play Mode
• Press the button repeatedly on the unit to switch between BLUETOOTH, USB, AUX IN, HDMI ARC. Alternati-
vely press the , USB, COAX, AUX and HDMI ARC button on the remote control to select the desired source.
Note: If there is no signal, the unit will automatically switch off within 19 minutes to save energy.
Adjust the Volume
• Press the VOL + / – buttons to adjust the volume.
• If you want to turn off the sound, press the MUTE button on the remote control. Press the MUTE button again
or press the VOL + / - button to resume normal listening.
Note: If you adjust the volume to above 26 then power off, when you power on again, the volume will automati-
cally be restored to the factory setting.
Selecting the Sound Effect
The default Sound Effect is MUSIC. While playing, press EQ button on the remote control to switch sound effect.
The options are NEWS, NORMAL and MUSIC.
AUDIO IN/COAXIAL OPERATION
1. Press the button repeatedly on the unit or alternatively press the AUX/COAX buttons on the remote control
to select your desired source.
2. Operate your audio device directly for playback features.
3. Press the VOL + / – button to adjust the volume to your desired level.
Bluetooth Operation
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
You need to pair your Bluetooth device with this unit before you connect them for the first time.
18
on the unit to switch the main unit to
on the unit again to switch the unit back to ON