Remote Control - Ten Haaft Oyster Instructions D'utilisation

3. REMOTE CONTROL

3.1 Remote Control
Number XYZ
1
To switch the unit between ON and STANDBY mode
EQ
2
Press to select a preset sound effect. Default EQ is MUSIC, press to switch to NEWS, NORMAL
and MUSIC as recycle.
3
Press to mute or resume the sound
VOL + / VOL -
4
• Press to increase/decrease the volume level.
5
Press to play/pause in Bluetooth and USB.
6
Press to select previous/next track in Bluetooth and USB.
Press to switch audio source to bluetooth.
7
Press and hold to activate the pairing function in bluetooth and/or disconect the existing paired
bluetooth device.
USB/AUX
8
Toggle button to switch between audio USB and AUX.
• COAX
9
• Press to switch audio source to Coaxial.
HDMI ARC
Press to switch audio source to HDMI ARC.
10
To allow theTV remote control to power on/off the soundbar press and hold HDMI ARC button
until display shows «ON». (Default setting is off)
8