Instructions On How To Clean Surfaces; Bi-Directional Cleaning System - Duplex 280i AC Manuel D'utilisation

DUPLEX 280i
OPERATION AND USE
6.7

Instructions on how to clean surfaces

Check that the handle is in the rest position (perfectly vertical).
Switch on the appliance.
HAZARD!
Carry out the procedures with utmost care to prevent any risk of
falling, slipping or collisions. Use personal protective equipment
(PPE) if deemed necessary.
6.7.1

Bi-directional cleaning system

This system allows the work position to be reversed thanks to the two-way handle 13.
Reversing the handle 13 from right to left and vice versa, allows you to work in both
directions and reach the opposite ends of every room, without having to move the appliance.
1) Grab the handle, press the yellow safety lever 14 and lower the handle 13 slowly to
one side or the other. The appliance will start up and the revolving brushes will start
working on the floor.
2)
Move the appliance slowly forwards following the same cleaning track.
3) As the appliance is moving forward, activate the small lever 17 at short intervals to
dispense a minimum quantity of washing liquid, taking care not to wet too much and/
or flood the floor.
13
114
14
17
F.17
Rev.
1.1