Duplex 280i AC Manuel D'utilisation page 117

• Old wax-treated flooring and many other.
To polish floors, proceed as follows:
1) Fit the supplied grey brushes.
2)
Mix with water any wax cleaner product available (for the dose, follow the instructions
on the bottle) and fill the tank.
3) Move the appliance forward on the entire surface following the work stages indicated
(see section "6.7.2 Work
4) When the work is complete and the floor has dried thoroughly, fit the brown brushes
(option) to polish the surfaces.
5) Turn the recovery tank knob 6 to "1", so that only the brushes work and the recovery
system is deactivated.
6) Move the appliance forward on the entire surface following the work stages indicated
(see section "6.7.2 Work
WARNING
Wash the brown brushes (option) after each use to keep them in
good working order:
• Immerse them in lukewarm water and degreasing detergent.
• Stir and rinse.
• Use the brushes when they have dried thoroughly.
Rev.
1.1
stages").
stages").
117
DUPLEX 280i
OPERATION AND USE