Inserting A Memory Card (Optional); Turning On/Off Your Camcorder - AIPTEK AHD200 Mode D'emploi

Masquer les pouces Voir aussi pour AHD200:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 52

Inserting a memory card (optional)

To insert a memory card, do the followings:
(1) Open the LCD monitor.
(2) Slide open the SD card cover.
(3) Gently push the card as indicated until the card
reaches the bottom of the slot.
To remove the memory card, gently push the card and it
will pop up. Then pull the card out of the slot.

Turning on/off your camcorder

Open the LCD monitor or press and hold down the Power
button for 1 second to turn on the camcorder.
To turn off the camcorder, press and hold down the Power
button for 1 ~ 3 seconds or close the LCD monitor.
If the camcorder is not turned on after pressing the Power button,
please check:
1. The battery pack is well installed in the camcorder.
2. The battery pack has enough power left.
If the camcorder stays inactive for a long period of time, it may
automatically shut down due to the Auto-Off setting.


Publicité

Table des Matières
loading

Table des Matières