Hot Surface Indicator; Cooking Areas - Samsung NE58H9950WS Manuel D'utilisation

Masquer les pouces Voir aussi pour NE58H9950WS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.

Hot surface indicator

• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.

Cooking areas

• The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
• Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking surface. The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section "Using the
proper cookware" on page 38.
Manual Users_NE58H9950WS_AA_AC_DG68-00531A-00_EN.indd 35
5
2
1
1
3
6
English - 35
4
1. Left Front: 7", 1,800 W
(Bridge 2,600 W)
2. Left Rear: 7", 1,800 W
3. Right Front: 6"/9"/12", 3,000 W
4. Right Rear: 6", 1,200 W
5. Warming Center: 100 W
6. Hot surface indicator
2014-02-11
2:59:23

Publicité

Chapitres

Table des Matières
loading

Table des Matières