AEG FAVORIT 65050 VI1P Notice D'utilisation page 25

German French
degrees degrees
(°dH)
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the
water softener
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a programme".
2. Press and hold, at the same time,
button and button
indicators of buttons
start to flash.
3.
Press button
• The indicators of buttons
go off.
Water hardness
mmol/l
(°fH)
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
until the
, and
.
and
Clarke
degrees
23 - 27
18 - 22
13 - 17
5 - 12
< 5
•
The indicator of button
tinues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4.
Press button
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH
25
Water softener
adjustment
Level
1)
5
4
3
2
2)
1
con-
again and again to