Opening The Stand Cover Plate, Stand K Edu - Zeiss Stemi 305 Mode D'emploi

ZEISS
Fig. 28 Opening the stand cover plate,
stand K EDU
32
CARE, MAINTENANCE AND SERVICE
Maintenance
5.2.2
The stand cover plate (Fig. 28/1) may be removed
for cleaning or to remove any foreign matter which
might fallen in inadvertently.
•
To this effect, release the three recessed head
screws (Fig. 28/2), lift off the stand cover plate
(Fig. 28/1) carefully and then put it aside.
•
Make sure that the cable is not disconnected
from the stand cover plate (Fig. 28/1).
435063-7044-010
Stereo microscope
Opening the stand cover plate,
stand K EDU
To clean the LED board, use a soft
lintfree cloth, a cotton wool bud wound
around a round wooden stick or a brush
with natural bristles, possibly moistened
slightly in distilled water.
Stemi 305
04/2015