Pioneer PDK-TS01 Mode D'emploi page 10

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have fin-
ished reading the instructions, put them away in a safe place
for future reference.
This symbol refers to a hazard or unsafe practice which
can result in personal injury or property damage.
Installation
Consult your dealer if you encounter any difficulties with
this installation.
Pioneer is not liable for any damage resulting from im-
proper installation, improper use, modification, or natural
disasters.
10
CAUTION
Cautions
1. This table top stand was exclusively designed for plasma
displays produced by PIONEER.
2. Do not use this stand for a plasma display or any other
purpose that is not specified. The stand should not be
modified and should only be used for plasma displays.
3. Improper installation may result in the stand falling over
and cause serious injury. Be sure to have the plasma dis-
play lying flat when attaching the stand to the main dis-
play.
4. Installation Location
(a) Make sure to install the stand in a location that can
sufficiently support the combined weight of the
stand and the display.
(b) The installation location should be a completely flat
and stable surface. Take proper precautions when
installing the stand to make sure that the weight of
the display is equally distributed throughout the
stand.
(c) Do not install this stand outdoors, at a hot spring, or
near a beach.
(d) Do not install this stand where it may be subjected
to vibration or shock.
5. (a) Assemble the stand in accordance with all of the
instructions and securely stabilize the stand with
screws at all locations that are indicated.
There have been cases where after installing the
display, damage has occurred from the stand fall-
ing over or similar situations.
(b) To assure that the display is installed safely, installa-
tion should be performed with more than two
people.
(c) Before installation, turn off the power for the dis-
play and peripheral devices, then remove the power
cord plug from the power outlet.