Activating / Deactivating The Alarm Clock - DS Produkte WSC802 Mode D'emploi

Activating / Deactivating the Alarm Clock

Make sure that the correct time is set.
1. During the time display, press the MENU button to switch
to the alarm mode (see the "Setting the Alarm Time" chapter).
2. The alarm symbol for alarm 1 fl ashes on the display. Press
the button again for alarm 2.
3. Press the DOWN button again to activate the alarm.
Another symbol
4. Confi rm this with the MENU button.
5. On the time display, both symbols can now be seen on the
left next to the hour display.
6. At the preset time, the alarm switches on (see the "Setting
the Alarm Time" chapter).
8. Press the MEMORY button to switch off the alarm.
On the following day, the alarm will switch back on in
accordance with the settings.
9. To deactivate the alarm, repeat steps 1-3.
4_DE-GB-FR-NL_A6_V0.indb 43 4_DE-GB-FR-NL_A6_V0.indb 43
appears next to the bell symbol.
7. If you want to activate the
repeat alarm (snooze), when
the alarm sounds, press
(LIGHT/SNOOZE) on the
top of the basic device. The
alarm will ring again 5 min-
utes later.
43
11.10.2013 10:20:44 11.10.2013 10:20:44