Setting The Alarm Time - DS Produkte WSC802 Mode D'emploi

– If in setting mode you do not press any button for
around 10 seconds, the clock switches back to time
display and the current setting is adopted.
– When adjusting the clock in 12 hour mode, make sure
that you correctly set AM (morning) and PM (afternoon).
– On the time display, you can by repeatedly pressing
the MENU button switch from the time display to
the day and date display and access the alarm function
(see the "Setting the Alarm Time" chapter).

Setting the Alarm Time

1. During the time display, press the MENU button several
times to switch to the alarm mode.
2. The alarm symbol
MENU button for 2 seconds to get to alarm mode.
3. The hour display starts to fl ash. Set the alarm hour by
pressing the UP and DOWN buttons and confi rm this
with the MENU button.
4. You can also set the minutes in the same way.
5. To set a second alarm, press the MENU button again. And
set the alarm in the manner described in points 1-4.
6. After setting the alarm, the display shows the set alarm
time for 10 seconds and then automatically reverts back
to the time display. The bell symbol can now also be seen
next to the time.
After the alarm has fi rst been set, it is automatically
activated.
4_DE-GB-FR-NL_A6_V0.indb 42 4_DE-GB-FR-NL_A6_V0.indb 42
fl ashes on the display. Press the
42
11.10.2013 10:20:44 11.10.2013 10:20:44