Hartke ACOUSTIC RIBBON AC75 Mode D'emploi page 78

AC75 and AC150 Specifications
Nominal Input Level
Active
Piezo
Mic Input (CH2)
Line Inputs ( CH2)
Rated Output Power
AC75
AC150
Equalizer
Five-Band Graphic (Main Output)
Connectors
Ch1 Active Input
Ch1 Piezo Input
Ch2 Mic Input
Ch2 CD In Left and Right
Headphone - St.
Direct Output
Speaker System Impedance (Ohms)
Low Frequency Drivers
AC75
AC150
High Frequency Driver
AC75
AC150
Dimensions
AC75
AC150
Weight
AC75
AC150
Specifications are subject to change without notice.
-50 dBu.
-20 dBu
75 watts (1 x 50 Low Freq. 1 x 25 High Freq)
150 watts (2 x 50 Low Freq. 1 x 50 High Freq)
±12 dB, center @ 100 Hz, 350 Hz, 1 kHz, 3.5 kHz,
10 kHz
1/4" phone
1/4" phone
Female XLR
RCA
TRS 1/4" phone
Male XLR
4 Ohms Impedance
2 x 5" Special Design Hartke full range 8 ohm, 25
watt Drive Unit
4 x 5" Special Design Hartke full range 8 ohm, 25
watt Drive Unit
2 x 4-inch planer ribbon on a 5 x 7 waveguide,
2 x 4-inch planer ribbon on a 7 x 7 waveguide.
Height:17" (43.18 cm) Width:16.5" (42.09 cm)
Depth: 11.25" (28.30 cm)
Height:18.85" (47.88 cm) Width:19.75" (50.17 cm)
Depth: 15.25" (38.48 cm)
37.5 lbs. (17 kg)
48 lbs. (21.8 kg)
72