Geemarc CL1400 Notice D'utilisation page 9

INSTALLATION
- Replace the battery cover.
- Connect the line cord to the socket located at the
rear of telephone, then connect the plug to the
wall socket(*).
- Connect the adaptator plug to the adaptor socket
located on the back of the telephone, then con-
nect it to the wall socket (**). Please choose an
adaptor wall socket near your line plug to enable
you to unplug the adaptor quickly in case of a prob-
lem.
Note: The adaptor is required to make the tele-
phone work properly. Batteries are necessary in
case of network power failure to save a stored
number in memory and are required for phone book
use.
If the adaptor is accidentally unplugged (or in case
of power failure) and if the batteries are empty or
not in place, minimal restricted phone features only
will work (such as making a call or answering an
incoming call).
9