Removing The Sling - arjo MAA4031M Mode D'emploi

Masquer les pouces Voir aussi pour MAA4031M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

Removing the Sling

In Bed (14 steps)
Apply bed brakes and adjust the height of the bed
Adjust the bed to a seated position
If using a clip sling, position the DPS (Dynamic
WARNING
To avoid injury to the patient, pay close
attention when lowering or adjusting the
spreader bar.
weight of the patient is taken up by the receiving
Unbuckle the head section from the midsection of
Detach the sling belt around the patient's
sheet/tube IFU.
Make sure the patient is in a comfortable and
Fig. 14
In Chair/Wheelchair (13 steps)
(See Fig. 14 )
If using a clip toilet sling, position the DPS
Slightly push the sling/straps and not the patient,
towards the back of the chair/wheelchair for better
WARNING
To avoid injury to the patient, pay close
attention when lowering or adjusting the
spreader bar.
Make sure the patients lower back is positioned all
the way in against the chair/wheelchair to avoid the
Stand in front of the patient and lean the patient
Sliding
Lean the patient back up to a comfortable and
11
Sliding sheet/tube IFU
Fig. 15
EN
(See Fig. 15 )

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mla4031Mla4531

Table des Matières