Honeywell Le Sucre Mode D'emploi page 28

•
Locate an alarm in a room where the occupant(s) spend most of their time (e.g.
sitting room)
•
In a bedsit, place the CO alarm as far away from the cooking appliance as possible,
but near to where the person sleeps
Caution
•
Do not mount the cover on the base when the switch
is in the X position. Ensure the switch is in the OK
position.
•
The CO8M batteries are not replaceable; the product
is powered for life.
When the unit has completed 6 years of operation
the amber light will flash three times every 50
seconds and beep simultaneously. This indicates
that the alarm has reached its end-of-life date and
must be replaced. This date is written on the
product.
How to install
1. Remove the mounting plate from the packaging and
the protective carton.
2. Place the mounting plate on the ceiling or wall
exactly where you want to mount the CO alarm. With
a pencil, mark the location of the two screw holes.
3. Drill holes using a 5.0 mm drill bit through the centre
of the marked locations.
Caution: When drilling holes, take care to avoid
any electrical wiring already present in the
ceiling or the wall.
4. Push the plastic screw anchors provided into the
drilled holes, and screw the mounting plate to the
ceiling or wall.
28