Care And Cleaning Of The Oven; Oven Vent; Cleaning Stainless Steel Surfaces - Samsung NE58F9500SS Manuel D'utilisation

Masquer les pouces Voir aussi pour NE58F9500SS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CARE AND CLEANING OF THE OVEN

• Be sure all controls are OFF and all surfaces are COOL before cleaning any
part of the range.
WARNING
• If your range is removed for cleaning, servicing, or
any reason, be sure the Anti-Tip device is re-engaged
properly when the range is replaced. If you fail to re-
engage the Anti-Tip device, the range could tip and
cause serous injury.

Oven vent

Cleaning painted parts and decorative trim
• For general cleaning, use a cloth with hot and soapy water.
• For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and
leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on
any of these surfaces. They can scratch.

Cleaning stainless steel surfaces

1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.
2. Place a small amount of Stainless Steel Appliance Cleaner or polish on a damp cloth or damp
paper towel.
3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
• Do not use a steel-wool pad. It will scratch the surface.
• If a mineral oil-based stainless steel appliance cleaner has been used before to clean
the appliance, wash the surface with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.
Oven vent
English - 59
• The oven vent is located below
the control box.
• This area could become hot
during oven use.
• It is normal for steam to come
out of the vent.
• The vent is important for proper
air circulation. Never block this
vent.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ne58k9500sg

Table des Matières